PLANET WGSW-52040 User Manual
Page 593

36-133
Admin Mode
Usage Guide:
If no VLAN number is specified, it will show whether the global MLD snooping is enabled and layer 3 multicast
protocol is running, as well as on which VLAN the MLD Snooping is enabled and configured l2-general-querier. If a
VLAN number is specified, the detailed MLD Snooping messages of this VLAN will be displayed.
Example:
1. Summary of the switch MLD snooping
Switch(config)#show ipv6 mld snooping
Global mld snooping status: Enabled
L3 multicasting: running
Mld snooping is turned on for vlan 1(querier)
Mld snooping is turned on for vlan 2
--------------------------------
Displayed Information
Explanation
Global mld snooping status
Whether or not the global MLD Snooping is enabled on the switch
L3 multicasting
Whether or not the layer 3 multicast protocol is running on the
switch.
Mld snooping is turned on for vlan
1(querier)
On which VLAN of the switch is enabled MLD Snooping, if the
VLAN are l2-general-querier.
2. Display the detailed MLD Snooping information of vlan1
Switch#show ipv6 mld snooping vlan 1
Mld snooping information for vlan 1
Mld snooping L2 general querier :Yes(COULD_QUERY)
Mld snooping query-interval :125(s)
Mld snooping max reponse time :10(s)
Mld snooping robustness :2
Mld snooping mrouter port keep-alive time :255(s)
Mld snooping query-suppression time :255(s)
MLD Snooping Connect Group Membership
Note:*-All Source, (S)- Include Source, [S]-Exclude Source
Groups Sources Ports Exptime System Level
Ff1e::15 (2000::1) Ethernet1/8 00:04:14 V2