PLANET WGSW-52040 - Manual (Page 709)

47-249
47.9 mac-authentication-bypass timeout stale-period
Command:
mac-authentication-bypass timeout stale-period <0-60>
no mac-authentication-bypass timeout stale-period
Function:
Set the time that delete the binding user after MAB port is down. The no command restores the default value.
Parameters:
<1-60>: The time that delete the binding, ranging from 0 to 60s.
Command Mode:
Global Mode
Default:
30s.
Usage Guide:
If the time that delete the binding as 0, delete all user binding of this port as soon as the MAB port is down, if the time
is bigger than 0, delete the user binding with a delay after the MAB port is down.
Example:
Configure the deletion time as 40s.
Switch(Config)#mac-authentication-bypass timeout stale-period 40
47.10 mac-authentication-bypass username-format
Command:
mac-authentication-bypass username-format {mac-address | {fixed username WORD
password WORD}}
Function:
Set the authenticate method of MAB authentication.
Parameters:
mac-address: Use MAC address of MAB user as username and password to authenticate.