PLANET WGSW-52040 - Manual (Page 233)

13-2
Parameter: on/off:
Enable or disable the debugging.
Command Mode:
Admin mode
Default:
Off.
Usage Guide:
Disable the DDM debugging with ctrl+o.
Example:
Enable DDM debugging.
Switch#debug transceiver on
13.3 show transceiver
Command:
show transceiver [interface ethernet ] [detail]
Function:
Show the monitoring of the transceiver.
Parameter:
interface ethernet : The interface list that the monitoring of the transceiver needs to be shown.
detail：Show the detailed monitoring of the transceiver.
Command Mode:
User mode, admin mode and global mode
Default:
None.
Usage Guide:
Temperature can be accurate to the integer, other values can be accurate to the second bit after the radix point.
When the parameter exceeds the warning threshold, it is shown with ‘W+’ or ‘W-’, when the parameter exceeds the