PLANET WGSW-52040 - Manual (Page 826)

60-366
To enable/cancel NTP authentication function, and defined NTP authentication key.
Parameter:
key-id: The id of key, range is from 1 to 4294967295.
value: The value of key, range between 1 to 16 of ascii code.
Default:
The authentication key of NTP authentication is not configured by default.
Command Mode:
Global Mode.
Usage Guide:
None.
Example:
To define the authentication key of NTP authentication, the key-id is 20, the md5 is abc.
Switch(config)# ntp authentication-key 20 md5 abc
60.10 ntp broadcast server count
Command:
ntp broadcast server count
no ntp broadcast server count
Function:
Set the max number of broadcast or multicast servers supported by the NTP client. The no operation will cancel the
configuration and restore the default value.
Parameters:
number：1-100, the max number of broadcast servers.
Default:
The default max number of broadcast servers is 50.
Command Mode:
Global Mode.