PLANET WGSW-52040 - Manual (Page 263)

17-32
17.1.8 garp timer leave
Command:
garp timer leave <500-1200>
Function:
Set the value of garp leave timer, note that the value of leave timer must be double of join timer and less than
leaveAll timer.
Parameters:
<500-1200>, the value of timer in millisecond
Command Mode:
Global mode
Default:
600 ms.
Usage Guide:
Check whether the value satisfy the range. If so, modify the value of garp timer to the specified value, otherwise
return a configuration error.
Example:
Set the value of garp leave timer as 600ms.
Switch(config)#garp timer leave 600
17.1.9 garp timer leaveAll
Command:
garp timer leaveall <5000-60000>
Function:
Set the value of garp leaveAll timer, note that the value of leaveAll timer must be larger than leave timer.
Parameters:
<5000-60000>, the value of timer in millisecond