PLANET WGSW-52040 - Manual (Page 528)

33-68
Parameters:
: the number of defense action on each port, the range of which is 1-200, and the value of which is 10 by
default.
default: recover to the default value.
Command Mode:
Globe mode
Default Settings:
The default value is 10.
Usage Guide:
Set the max number of defense actions to avoid the resource exhaustion of the switch caused by attacks. If the
number of alarm information is larger than the set value, then the earliest defense action will be recovered forcibly in
order to send new defense actions.
Example:
Set the number of port defense actions as 100.
switch(config)#ip dhcp snooping action 100
33.10 ip dhcp snooping binding
Command:
ip dhcp snooping binding enable
no ip dhcp snooping binding enable
Function:
Enable the DHCP Snooping binding funciton
Parameters:
None.
Command Mode:
Globe mode
Default Settings: