PLANET WGSW-52040 - Manual (Page 78)

1-77
Switch#telnet 20.1.1.1 23
Connecting Host 20.1.1.1 Port 23...
Service port is 23
Connected to 20.1.1.1
login:123
password:***
router>
1.2.17 telnet server enable
Command:
telnet server enable
no telnet server enable
Function:
Enable the Telnet server function in the switch: the “no telnet server enable” command disables the Telnet function in
the switch.
Default:
Telnet server function is enabled by default.
Command mode:
Global Mode
Usage Guide:
This command is available in Console only. The administrator can use this command to enable or disable the Telnet
client to login to the switch.
Example:
Disable the Telnet server function in the switch.
Switch(config)#no telnet server enable
1.2.18 telnet-server max-connection
Command:
telnet-server max-connection { | default}