4 voice-vlan vlan, 4 voice-vlan vlan -74 – PLANET WGSW-52040 User Manual

Page 305

17-74

17.4.4 voice-vlan vlan

Command:

voice-vlan vlan <vlan-id>

no voice-vlan

Function:

Configure the specified VLAN to Voice VLAN; the “no voice-vlan” command cancels the Voice VLAN configuration

of this VLAN.

Parameter:

Vlan id is the number of the specified VLAN.

Command Mode:

Global Mode.

Default:

No Voice VLAN is configured by default.

Usage Guide:

Set specified VLAN for Voice VLAN, There can be only one Voice VLAN at the same time. The voice VLAN cannot

be applied concurrently with MAC-based VLAN.

Example:

Set VLAN100 to Voice VLAN.

Switch#config

Switch(config)#voice-vlan vlan 100