Directory

Brands

PLANET manuals

Routers

WGSW-52040

Manual

PLANET WGSW-52040 User Manual

Conmmand guide

Text mode
Original mode

background image

www.PLANET.com.tw

Conmmand Guide

48-Port 10/100/1000Base-T
+ 4-Port 100/1000X SFP
Managed Switch

WGSW-52040

Pages: 1 2 3 4 5 6 7 … 876

wrong Brand
wrong Model
non readable

Table of contents

Document Outline

Chapter 1 Commands for Basic Switch Configuration
- 1.1 Commands for Basic Configuration
- 1.2 Commands for Telnet
- 1.3 Commands for Configuring Switch IP
- 1.4 Commands for SNMP
- 1.5 Commands for Switch Upgrade
Chapter 2 File System Commands
- 2.1 cd
- 2.2 copy
- 2.3 delete
- 2.4 dir
- 2.5 format
- 2.6 mkdir
- 2.7 pwd
- 2.8 rename
- 2.9 rmdir
Chapter 3 Commands for Cluster
- 3.1 clear cluster nodes
- 3.2 cluster auto-add
- 3.3 cluster commander
- 3.4 cluster ip-pool
- 3.5 cluster keepalive interval
- 3.6 cluster keepalive loss-count
- 3.7 cluster member
- 3.8 cluster member auto-to-user
- 3.9 cluster reset member
- 3.10 cluster run
- 3.11 cluster update member
- 3.12 debug cluster
- 3.13 debug cluster packets
- 3.14 show cluster
- 3.15 show cluster members
- 3.16 show cluster candidates
- 3.17 show cluster topology
- 3.18 rcommand commander
- 3.19 rcommand member
Chapter 4 Commands for Network Port Configuration
- 4.1 Commands for Ethernet Port Configuration
Chapter 5 Commands for Port Isolation Function
- 5.1 isolate-port group
- 5.2 isolate-port group switchport interface
- 5.3 show isolate-port group
Chapter 6 Commands for Port Loopback Detection Function
- 6.1 debug loopback-detection
- 6.2 loopback-detection control
- 6.3 loopback-detection control-recovery timeout
- 6.4 loopback-detection interval-time
- 6.5 loopback-detection specified-vlan
- 6.6 show loopback-detection
Chapter 7 Commands for ULDP
- 7.1 debug uldp
- 7.2 debug uldp error
- 7.3 debug uldp event
- 7.4 debug uldp fsm interface ethernet
- 7.5 debug uldp interface ethernet
- 7.6 debug uldp packet
- 7.7 uldp aggressive-mode
- 7.8 uldp enable
- 7.9 uldp disable
- 7.10 uldp hello-interval
- 7.11 uldp manual-shutdown
- 7.12 uldp recovery-time
- 7.13 uldp reset
- 7.14 show uldp
Chapter 8 Commands for LLDP Function
- 8.1 clear lldp remote-table
- 8.2 debug lldp
- 8.3 debug lldp packets
- 8.4 lldp enable
- 8.5 lldp enable (Port)
- 8.6 lldp mode
- 8.7 lldp msgTxHold
- 8.8 lldp neighbors max-num
- 8.9 lldp notification interval
- 8.10 lldp tooManyNeighbors
- 8.11 lldp transmit delay
- 8.12 lldp transmit optional tlv
- 8.13 lldp trap
- 8.14 lldp tx-interval
- 8.15 show debugging lldp
- 8.16 show lldp
- 8.17 show lldp interface ethernet
- 8.18 show lldp neighbors interface ethernet
- 8.19 show lldp traffic
Chapter 9 Commands for Port Channel
- 9.1 debug port-channel
- 9.2 interface port-channel
- 9.3 lacp port-priority
- 9.4 lacp system-priority
- 9.5 lacp timeout
- 9.6 load-balance
- 9.7 port-group
- 9.8 port-group mode
- 9.9 show port-group
Chapter 10 Commands for MTU
- 10.1 mtu
Chapter 11 Commands for EFM OAM
- 11.1 clear ethernet-oam
- 11.2 debug ethernet-oam error
- 11.3 debug ethernet-oam fsm
- 11.4 debug ethernet-oam packet
- 11.5 debug ethernet-oam timer
- 11.6 ethernet-oam
- 11.7 ethernet-oam errored-frame threshold high
- 11.8 ethernet-oam errored-frame threshold low
- 11.9 ethernet-oam errored-frame window
- 11.10 ethernet-oam errored-frame-period threshold high
- 11.11 ethernet-oam errored-frame-period threshold low
- 11.12 ethernet-oam errored-frame-period window
- 11.13 ethernet-oam errored-frame-seconds threshold high
- 11.14 ethernet-oam errored-frame-seconds threshold low
- 11.15 ethernet-oam errored-frame-seconds window
- 11.16 ethernet-oam errored-symbol-period threshold high
- 11.17 ethernet-oam errored-symbol-period threshold low
- 11.18 ethernet-oam errored-symbol-period window
- 11.19 ethernet-oam link-monitor
- 11.20 ethernet-oam mode
- 11.21 ethernet-oam period
- 11.22 ethernet-oam remote-failure
- 11.23 ethernet-oam timeout
- 11.24 show ethernet-oam
- 11.25 show ethernet-oam events
- 11.26 show ethernet-oam link-events configuration
Chapter 12 Commands for PORT SECURITY
- 12.1 clear port-security
- 12.2 show port-security
- 12.3 switchport port-security
- 12.4 switchport port-security aging
- 12.5 switchport port-security mac-address
- 12.6 switchport port-security mac-address sticky
- 12.7 switchport port-security maximum
- 12.8 switchport port-security violation
Chapter 13 Commands for DDM
- 13.1 clear transceiver threshold-violation
- 13.2 debug transceiver
- 13.3 show transceiver
- 13.4 show transceiver threshold-violation
- 13.5 transceiver-monitoring
- 13.6 transceiver-monitoring interval
- 13.7 transceiver threshold
Chapter 14 Commands for LLDP-MED
- 14.1 civic location
- 14.2 {description-language | province-state | city | county | street | locationNum | location | floor | room | postal | otherInfo}
- 14.3 ecs location
- 14.4 lldp med fast count
- 14.5 lldp med trap
- 14.6 lldp transmit med tlv all
- 14.7 lldp transmit med tlv capability
- 14.8 lldp transmit med tlv extendPoe
- 14.9 lldp transmit med tlv inventory
- 14.10 lldp transmit med tlv networkPolicy
- 14.11 network policy
- 14.12 show lldp
- 14.13 show lldp [interface ethernet ]
- 14.14 show lldp neighbors
Chapter 15 Commands for bpdu-tunnel
- 15.1 bpdu-tunnel dmac
- 15.2 bpdu-tunnel stp
- 15.3 bpdu-tunnel gvrp
- 15.4 bpdu-tunnel uldp
- 15.5 bpdu-tunnel lacp
- 15.6 bpdu-tunnel dot1x
Chapter 16 Commands for EEE Energy-saving
- 16.1 eee enable
Chapter 17 VLAN Configuration
- 17.1 Commands for VLAN Configuration
- 17.2 Commands for Multi-to-One VLAN Translation
  - 17.2.1 vlan-translation n-to-1
  - 17.2.2 show vlan-translation n-to-1
- 17.3 Commands for Dynamic VLAN Configuration
- 17.4 Commands for Voice VLAN Configuration
Chapter 18 Commands for MAC Address Table Configuration
- 18.1 Commands for MAC Address Table Configuration
- 18.2 Commands for Mac Address Binding configuration
- 18.3 Commands for MAC Notification
Chapter 19 Commands for MSTP
- 19.1 Commands for MSTP
- 19.2 Commands for Monitor and Debug
Chapter 20 Commands for QoS
- 20.1 accounting
- 20.2 class
- 20.3 class-map
- 20.4 clear mls qos statistics
- 20.5 drop
- 20.6 match
- 20.7 mls qos cos
- 20.8 mls qos map
- 20.9 mls qos queue algorithm
- 20.10 mls qos queue wrr weight
- 20.11 mls qos queue wdrr weight
- 20.12 mls qos queue bandwidth
- 20.13 mls qos trust
- 20.14 policy
- 20.15 policy aggregate
- 20.16 policy-map
- 20.17 service-policy input
- 20.18 service-policy input vlan
- 20.19 set
- 20.20 show class-map
- 20.21 show policy-map
- 20.22 show mls qos interface
- 20.23 show mls qos maps
- 20.24 show mls qos vlan
- 20.25 transmit
Chapter 21 Commands for Flow-based Redirection
- 21.1 access-group redirect to interface ethernet
- 21.2 show flow-based-redirect
Chapter 22 Commands for Flexible QinQ
- 22.1 match
- 22.2 service-policy
- 22.3 set
Chapter 23 Commands for Layer 3 Management
- 23.1 Commands for Layer 3 Interface
- 23.2 Commands for IPv4/v6 configuration
- 23.3 Commands for ARP Configuration
Chapter 24 IPv4 Multicast Protocol
- 24.1 anti-arpscan enable
- 24.2 anti-arpscan port-based threshold
- 24.3 anti-arpscan ip-based threshold
- 24.4 anti-arpscan trust
- 24.5 anti-arpscan trust ip
- 24.6 anti-arpscan recovery enable
- 24.7 anti-arpscan recovery time
- 24.8 anti-arpscan log enable
- 24.9 anti-arpscan trap enable
- 24.10 show anti-arpscan
- 24.11 debug anti-arpscan
Chapter 25 Commands for Preventing ARP Spoofing
- 25.1 ip arp-security updateprotect
- 25.2 ip arp-security learnprotect
- 25.3 ip arp-security convert
- 25.4 clear ip arp dynamic
- 25.5 clear ipv6 nd dynamic
Chapter 26 Command for ARP GUARD
- 26.1 arp-guard ip
Chapter 27 Commands for Gratuitous ARP Configuration
- 27.1 ip gratuitous-arp
- 27.2 show ip gratuitous-arp
Chapter 28 Commands for DHCP
- 28.1 Commands for DHCP Server Configuration
- 28.2 Commands for DHCP Relay Configuration
Chapter 29 Commands for DHCPv6
- 29.1 clear ipv6 dhcp binding
- 29.2 clear ipv6 dhcp conflict
- 29.3 clear ipv6 dhcp statistics
- 29.4 debug ipv6 dhcp client packet
- 29.5 debug ipv6 dhcp detail
- 29.6 debug ipv6 dhcp relay packet
- 29.7 debug ipv6 dhcp server
- 29.8 dns-server
- 29.9 domain-name
- 29.10 excluded-address
- 29.11 ipv6 address
- 29.12 ipv6 dhcp client pd
- 29.13 ipv6 dhcp client pd hint
- 29.14 ipv6 dhcp pool
- 29.15 ipv6 dhcp relay destination
- 29.16 ipv6 dhcp server
- 29.17 ipv6 general-prefix
- 29.18 ipv6 local pool
- 29.19 lifetime
- 29.20 network-address
- 29.21 prefix-delegation
- 29.22 prefix-delegation pool
- 29.23 service dhcpv6
- 29.24 show ipv6 dhcp
- 29.25 show ipv6 dhcp binding
- 29.26 show ipv6 dhcp conflict
- 29.27 show ipv6 dhcp interface
- 29.28 show ipv6 dhcp pool
- 29.29 show ipv6 dhcp statistics
- 29.30 show ipv6 general-prefix
- 29.31 show ipv6 local pool
Chapter 30 Commands for DHCP Option 82
- 30.1 debug ip dhcp relay packet
- 30.2 ip dhcp relay information option
- 30.3 ip dhcp relay information option delimiter
- 30.4 ip dhcp relay information option remote-id
- 30.5 ip dhcp relay information option remote-id format
- 30.6 ip dhcp relay information option self-defined remote-id
- 30.7 ip dhcp relay information option self-defined remote-id format
- 30.8 ip dhcp relay information option self-defined subscriber-id
- 30.9 ip dhcp relay information option self-defined subscriber-id format
- 30.10 ip dhcp relay information option subscriber-id
- 30.11 ip dhcp relay information option subscriber-id format
- 30.12 ip dhcp relay information policy
- 30.13 ip dhcp server relay information enable
- 30.14 show ip dhcp relay information option
Chapter 31 IPv4 Multicast Protocol
- 31.1 option 43 ascii LINE
- 31.2 option 43 hex WORD
- 31.3 option 43 ip A.B.C.D
- 31.4 option 60 ascii LINE
- 31.5 option 60 hex WORD
- 31.6 option 60 ip A.B.C.D
Chapter 32 Commands for DHCPv6 option37, 38
- 32.1 Commands for DHCPv6 option37, 38
- 32.2 Commands for Monitoring and Debugging
Chapter 33 Commands for DHCP Snooping
- 33.1 debug ip dhcp snooping binding
- 33.2 debug ip dhcp snooping event
- 33.3 debug ip dhcp snooping packet
- 33.4 debug ip dhcp snooping packet interface
- 33.5 debug ip dhcp snooping update
- 33.6 enable trustview key
- 33.7 ip dhcp snooping
- 33.8 ip dhcp snooping action
- 33.9 ip dhcp snooping action MaxNum
- 33.10 ip dhcp snooping binding
- 33.11 ip dhcp snooping binding dot1x
- 33.12 ip dhcp snooping binding user
- 33.13 ip dhcp snooping binding user-control
- 33.14 ip dhcp snooping binding user-control max-user
- 33.15 ip dhcp snooping information enable
- 33.16 ip dhcp snooping information option allow-untrusted (replace|)
- 33.17 ip dhcp snooping information option delimiter
- 33.18 ip dhcp snooping information option remote-id
- 33.19 ip dhcp snooping information option self-defined remote-id
- 33.20 ip dhcp snooping information option self-defined remote-id format
- 33.21 ip dhcp snooping information option self-defined subscriber-id
- 33.22 ip dhcp snooping information option self-defined subscriber-id format
- 33.23 ip dhcp snooping information option subscriber-id
- 33.24 ip dhcp snooping information option subscriber-id format
- 33.25 ip dhcp snooping limit-rate
- 33.26 ip dhcp snooping trust
- 33.27 ip user helper-address
- 33.28 ip user private packet version two
- 33.29 show ip dhcp snooping
- 33.30 show ip dhcp snooping binding all
- 33.31 show trustview status
Chapter 34 Commands for DHCP Snooping option 82
- 34.1 ip dhcp snooping information enable
Chapter 35 IPv4 Multicast Protocol
- 35.1 Commands for DCSCM
- 35.2 Commands for IGMP Snooping
Chapter 36 IPv6 Multicast Protocol
- 36.1 Commands for MLD Snooping Configuration
Chapter 37 Commands for Multicast VLAN
- 37.1 multicast-vlan
- 37.2 multicast-vlan association
- 37.3 multicast-vlan association interface
Chapter 38 Commands for ACL
- 38.1 absolute-periodic/periodic
- 38.2 absolute start
- 38.3 access-list (ip extended)
- 38.4 access-list (ip standard)
- 38.5 access-list(mac extended)
- 38.6 access-list(mac-ip extended)
- 38.7 access-list(mac standard)
- 38.8 clear access-group statistic
- 38.9 firewall
- 38.10 ip access extended
- 38.11 ip access standard
- 38.12 ipv6 access-list
- 38.13 ipv6 access standard
- 38.14 ipv6 access extended
- 38.15 {ip|ipv6|mac|mac-ip} access-group
- 38.16 mac access extended
- 38.17 mac-ip access extended
- 38.18 permit | deny (ip extended)
- 38.19 permit | deny(ip standard)
- 38.20 permit | deny(ipv6 extended)
- 38.21 permit | deny(ipv6 standard)
- 38.22 permit | deny(mac extended)
- 38.23 permit | deny(mac-ip extended)
- 38.24 show access-lists
- 38.25 show access-group
- 38.26 show firewall
- 38.27 show ipv6 access-lists
- 38.28 show time-range
- 38.29 time-range
Chapter 39 Commands for 802.1x
- 39.1 debug dot1x detail
- 39.2 debug dot1x error
- 39.3 debug dot1x fsm
- 39.4 debug dot1x packet
- 39.5 dot1x accept-mac
- 39.6 dot1x eapor enable
- 39.7 dot1x enable
- 39.8 dot1x ipv6 passthrough
- 39.9 dot1x guest-vlan
- 39.10 dot1x macfilter enable
- 39.11 dot1x macbased port-down-flush
- 39.12 dot1x max-req
- 39.13 dot1x user allow-movement
- 39.14 dot1x user free-resource
- 39.15 dot1x max-user macbased
- 39.16 dot1x max-user userbased
- 39.17 dot1x portbased mode single-mode
- 39.18 dot1x port-control
- 39.19 dot1x port-method
- 39.20 dot1x privateclient enable
- 39.21 dot1x privateclient protect enable
- 39.22 dot1x re-authenticate
- 39.23 dot1x re-authentication
- 39.24 dot1x timeout quiet-period
- 39.25 dot1x timeout re-authperiod
- 39.26 dot1x timeout tx-period
- 39.27 dot1x unicast enable
- 39.28 show dot1x
Chapter 40 Commands for the Number Limitation Function of MAC and IP in Port, VLAN
- 40.1 debug ip arp count
- 40.2 debug ipv6 nd count
- 40.3 debug switchport arp count
- 40.4 debug switchport mac count
- 40.5 debug switchport nd count
- 40.6 debug vlan mac count
- 40.7 ip arp dynamic maximum
- 40.8 ipv6 nd dynamic maximum
- 40.9 mac-address query timeout
- 40.10 show arp-dynamic count
- 40.11 show mac-address dynamic count
- 40.12 show nd-dynamic count
- 40.13 switchport arp dynamic maximum
- 40.14 switchport mac-address dynamic maximum
- 40.15 switchport mac-address violation
- 40.16 switchport nd dynamic maximum
- 40.17 vlan mac-address dynamic maximum
Chapter 41 Commands for AM Configuration
- 41.1 am enable
- 41.2 am port
- 41.3 am ip-pool
- 41.4 am mac-ip-pool
- 41.5 no am all
- 41.6 show am
Chapter 42 Commands for Security Feature
- 42.1 dosattack-check srcip-equal-dstip enable
- 42.2 dosattack-check tcp-flags enable
- 42.3 dosattack-check srcport-equal-dstport enable
- 42.4 dosattack-check icmp-attacking enable
- 42.5 dosattack-check icmpV4-size
Chapter 43 Commands for TACACS+
- 43.1 tacacs-server authentication host
- 43.2 tacacs-server key
- 43.3 tacacs-server nas-ipv4
- 43.4 tacacs-server timeout
- 43.5 debug tacacs-server
Chapter 44 Commands for RADIUS
- 44.1 aaa enable
- 44.2 aaa-accounting enable
- 44.3 aaa-accounting update
- 44.4 debug aaa packet
- 44.5 debug aaa detail attribute
- 44.6 debug aaa detail connection
- 44.7 debug aaa detail event
- 44.8 debug aaa error
- 44.9 radius nas-ipv4
- 44.10 radius nas-ipv6
- 44.11 radius-server accounting host
- 44.12 radius-server authentication host
- 44.13 radius-server dead-time
- 44.14 radius-server key
- 44.15 radius-server retransmit
- 44.16 radius-server timeout
- 44.17 radius-server accounting-interim-update timeout
- 44.18 show aaa authenticated-user
- 44.19 show aaa authenticating-user
- 44.20 show aaa config
- 44.21 show radius authenticated-user count
- 44.22 show radius authenticating-user count
- 44.23 show radius count
Chapter 45 Commands for SSL Configuration
- 45.1 ip http secure-server
- 45.2 ip http secure-port
- 45.3 ip http secure- ciphersuite
- 45.4 show ip http secure-server status
- 45.5 debug ssl
Chapter 46 Commands for IPv6 Security RA
- 46.1 ipv6 security-ra enable
- 46.2 ipv6 security-ra enable
- 46.3 show ipv6 security-ra
- 46.4 debug ipv6 security-ra
Chapter 47 Commands for MAB
- 47.1 authentication mab
- 47.2 clear mac-authentication-bypass binding
- 47.3 debug mac-authentication-bypass
- 47.4 mac-authentication-bypass binding-limit
- 47.5 mac-authentication-bypass enable
- 47.6 mac-authentication-bypass spoofing-garp-check
- 47.7 mac-authentication-bypass timeout offline-detect
- 47.8 mac-authentication-bypass timeout quiet-period
- 47.9 mac-authentication-bypass timeout stale-period
- 47.10 mac-authentication-bypass username-format
- 47.11 show mac-authentication-bypass
Chapter 48 Commands for PPPoE Intermediate Agent
- 48.1 debug pppoe intermediate agent packet {receive | send} interface ethernet
- 48.2 pppoe intermediate-agent
- 48.3 pppoe intermediate-agent (Port)
- 48.4 pppoe intermediate-agent circuit-id
- 48.5 pppoe intermediate-agent delimiter
- 48.6 pppoe intermediate-agent format
- 48.7 pppoe intermediate-agent remote-id
- 48.8 pppoe intermediate-agent trust
- 48.9 pppoe intermediate-agent type self-defined circuit-id
- 48.10 pppoe intermediate-agent type self-defined remote-id
- 48.11 pppoe intermediate-agent type tr-101 circuit-id access-node-id
- 48.12 pppoe intermediate-agent type tr-101 circuit-id identifier-string option delimiter
- 48.13 pppoe intermediate-agent vendor-tag strip
- 48.14 show pppoe intermediate-agent access-node-id
- 48.15 show pppoe intermediate-agent identifier-string option delimiter
- 48.16 show pppoe intermediate-agent info
Chapter 49 Commands for Web Portal Configuration
- 49.1 clear webportal binding
- 49.2 debug webportal binding
- 49.3 debug webportal error
- 49.4 debug webportal event
- 49.5 debug webportal packet
- 49.6 ip dhcp snooping binding webportal
- 49.7 show webportal
- 49.8 show webportal binding
- 49.9 webportal binding-limit
- 49.10 webportal enable
- 49.11 webportal enable (Port)
- 49.12 webportal nas-ip
- 49.13 webportal redirect
Chapter 50 Commands for VLAN-ACL
- 50.1 clear vacl statistic vlan
- 50.2 show vacl vlan
- 50.3 vacl ip access-group
- 50.4 vacl ipv6 access-group
- 50.5 vacl mac access-group
- 50.6 vacl mac-ip access-group
Chapter 51 Commands for SAVI
- 51.1 Commands for SAVI
- 51.2 Commands for Monitor and Debug
Chapter 52 Commands for MRPP
- 52.1 control-vlan
- 52.2 clear mrpp statistics
- 52.3 debug mrpp
- 52.4 enable
- 52.5 errp domain
- 52.6 fail-timer
- 52.7 hello-timer
- 52.8 mrpp eaps compatible
- 52.9 mrpp enable
- 52.10 mrpp errp compatible
- 52.11 mrpp poll-time
- 52.12 mrpp ring
- 52.13 mrpp ring primary-port
- 52.14 mrpp ring secondary-port
- 52.15 node-mode
- 52.16 show mrpp
- 52.17 show mrpp statistics
Chapter 53 Commands for ULPP
- 53.1 clear ulpp flush counter interface
- 53.2 control vlan
- 53.3 debug ulpp error
- 53.4 debug ulpp event
- 53.5 debug ulpp flush content interface
- 53.6 debug ulpp flush {send | receive} interface
- 53.7 description
- 53.8 flush disable arp
- 53.9 flush disable mac
- 53.10 flush disable mac-vlan
- 53.11 flush enable arp
- 53.12 flush enable mac
- 53.13 flush enable mac-vlan
- 53.14 preemption delay
- 53.15 preemption mode
- 53.16 protect vlan-reference-instance
- 53.17 show ulpp flush counter interface
- 53.18 show ulpp flush-receive-port
- 53.19 show ulpp group
- 53.20 ulpp control vlan
- 53.21 ulpp flush disable arp
- 53.22 ulpp flush disable mac
- 53.23 ulpp flush disable mac-vlan
- 53.24 ulpp flush enable arp
- 53.25 ulpp flush enable mac
- 53.26 ulpp flush enable mac-vlan
- 53.27 ulpp group
- 53.28 ulpp group master
- 53.29 ulpp group slave
Chapter 54 IPv4 Multicast Protocol
- 54.1 debug ulsm event
- 54.2 show ulsm group
- 54.3 ulsm group
- 54.4 ulsm group {uplink | downlink}
Chapter 55 Commands for Mirroring Configuration
- 55.1 monitor session source interface
- 55.2 monitor session source interface access-list
- 55.3 monitor session destination interface
- 55.4 show monitor
Chapter 56 Commands for sFlow
- 56.1 sflow agent-address
- 56.2 sflow analyzer
- 56.3 sflow counter-interval
- 56.4 sflow data-len
- 56.5 sflow destination
- 56.6 sflow header-len
- 56.7 sflow priority
- 56.8 sflow rate
- 56.9 show sflow
Chapter 57 Commands for RSPAN Configuration
- 57.1 remote-span
- 57.2 monitor session remote vlan
- 57.3 monitor session reflector-port
Chapter 58 Commands for ERSPAN
- 58.1 monitor session
- 58.2 monitor session destination tunnel
Chapter 59 Commands for SNTP
- 59.1 clock timezone
- 59.2 debug sntp
- 59.3 sntp polltime
- 59.4 sntp server
- 59.5 show sntp
Chapter 60 Commands for NTP
- 60.1 clock timezone
- 60.2 debug ntp adjust
- 60.3 debug ntp authentication
- 60.4 debug ntp events
- 60.5 debug ntp packet
- 60.6 debug ntp sync
- 60.7 ntp access-group
- 60.8 ntp authenticate
- 60.9 ntp authentication-key
- 60.10 ntp broadcast server count
- 60.11 ntp disable
- 60.12 ntp enable
- 60.13 ntp ipv6 multicast client
- 60.14 ntp multicast client
- 60.15 ntp server
- 60.16 ntp trusted-key
- 60.17 show ntp status
- 60.18 show ntp session
Chapter 61 Commands for Summer Time
- 61.1 clock summer-time absolute
- 61.2 clock summer-time recurring
- 61.3 clock summer-time recurring
Chapter 62 Commands for DNSv4/v6
- 62.1 Commands for DCSCM
  - 62.1.1 access-list (Multicast Destination Control)
- 62.2 clear dynamic-host
- 62.3 debug dns
- 62.4 dns-server
- 62.5 dns lookup
- 62.6 show dns name-server
- 62.7 show dns domain-list
- 62.8 show dns hosts
- 62.9 show dns config
- 62.10 show dns client
- 62.11 ip domain-lookup
- 62.12 ip domain-list
- 62.13 ip dns server
- 62.14 ip dns server queue maximum
- 62.15 ip dns server queue timeout
Chapter 63 Commands for Show
- 63.1 clear history all-users
- 63.2 clear logging
- 63.3 history all-users max-length
- 63.4 logging
- 63.5 logging executed-commands
- 63.6 logging loghost sequence-number
- 63.7 ping
- 63.8 ping6
- 63.9 show boot-files
- 63.10 show debugging
- 63.11 show flash
- 63.12 show history
- 63.13 show history all-users
- 63.14 show logging buffered
- 63.15 show logging executed-commands state
- 63.16 show logging source
- 63.17 show memory
- 63.18 show running-config
- 63.19 show running-config current-mode
- 63.20 show startup-config
- 63.21 show switchport interface
- 63.22 show tcp
- 63.23 show tcp ipv6
- 63.24 show telnet login
- 63.25 show tech-support
- 63.26 show udp
- 63.27 show udp ipv6
- 63.28 show version
- 63.29 traceroute
- 63.30 traceroute6
Chapter 64 Commands for Reload Switch after Specified Time
- 64.1 reload after
- 64.2 reload cancel
- 64.3 show reload
Chapter 65 Commands for Debugging and Diagnosis for Packets Received and Sent by CPU
- 65.1 clear cpu-rx-stat protocol
- 65.2 cpu-rx-ratelimit protocol
- 65.3 cpu-rx-ratelimit total
- 65.4 debug driver
- 65.5 show cpu-rx protocol

See also other documents in the category PLANET Routers: