PLANET WGSW-52040 - Manual (Page 872)

64-412
Usage Guide:
With this command, users can view the configuration of command “reload after” and check how long a time is left
before rebooting the switch.
Example:
View the configuration of command “reload after”. In the following case, the user set the switch to be rebooted in 10
hours and 1 second, and there are still 9 hours 59 minutes and 48 seconds left before rebooting it.
Switch#show reload
The original reload after configuration is 10:00:01.
System will be rebooted after 09:59:48 from now.
Related Commands: reload, reload after, reload cancel