PLANET WGSW-52040 - Manual (Page 828)

60-368
Function:
To enable/disable NTP function globally.
Parameter:
None.
Default:
Disabled.
Command Mode:
Global Mode.
Usage Guide:
None.
Example:
To enable NTP function.
Switch(config)#ntp enable
60.13 ntp ipv6 multicast client
Command:
ntp ipv6 multicast client
no ntp ipv6 multicast client
Function:
Configure the specified interface to receive IPv6 NTP multicast packets, the no command will cancels the specified
interface to receive IPv6 NTP multicast packets.
Parameter:
None.
Command mode:
vlan mode
Default:
Interface does not receive IPv6 NTP multicast packets.