PLANET WGSW-52040 - Manual (Page 504)

32-44
Switch(dhcp-1-class-CLASS1-config)#address range 2001:da8:100:1::2 2001:da8:100:1::30
32.1.2 class
Command:
class <class-name>
no class <class-name>
Function:
This command associates class to address pool in DHCPv6 address pool configuration mode and enters class
configuration mode in address pool. Use the no command to remove the link.
Parameters:
class-name, the name of DHCPv6 class.
Default:
None.
Command Mode:
DHCPv6 address pool configuration mode
Usage Guide:
It is recommended to define this class first using global command of IPv6 DHCP class. No class will be created if you
input a class name which doesn’t exist.
Example:
Associate the DHCPv6 class named CLASS1 to dhcpv6 pool 1.
Switch(Config)#ipv6 dhcp pool 1
Switch(dhcp-1-config)#class CLASS1
32.1.3 ipv6 dhcp class
Command:
ipv6 dhcp class <class-name>
no ipv6 dhcp class <class-name>