PLANET WGSW-52040 - Manual (Page 421)

24-32
24.6 anti-arpscan recovery enable
Command:
anti-arpscan recovery enable
no anti-arpscan recovery enable
Function:
Enable the automatic recovery function, “no anti-arpscan recovery enable” command will disable the function.
Parameters:
None
Default Settings:
Enable the automatic recovery function
Command Mode:
Global configuration mode
User Guide:
If the users want the normal state to be recovered after a while the port is closed or the IP is disabled, they can
configure this function.
Example:
Enable the automatic recovery function of the switch.
Switch(config)#anti-arpscan recovery enable
24.7 anti-arpscan recovery time
Command:
anti-arpscan recovery time
no anti-arpscan recovery time
Function:
Configure automatic recovery time; “no anti-arpscan recovery time” command resets the automatic recovery time
to default value.