PLANET WGSW-52040 - Manual (Page 79)

1-78
Function:
Configure the max connection number supported by the Telnet service of the switch.
Parameters:
: the max connection number supported by the Telnet service, ranging from 5 to 16. The
default option will restore the default configuration.
Default:
The system default value of the max connection number is 5.
Command Mode:
Global Mode
Usage Guide:
None.
Example:
Set the max connection number supported by the Telnet service as 10.
Switch(config)#telnet-server max-connection 10
1.2.19 ssh-server authentication-retries
Command:
ssh-server authentication-retries
no ssh-server authentication-retries
Function:
Configure the number of times for retrying SSH authentication; the “no ssh-server authentication-retries”
command restores the default number of times for retrying SSH authentication.
Parameter:
< authentication-retries > is the number of times for retrying authentication; valid range is 1 to 10.
Command mode:
Global Mode
Usage Guide: