PLANET WGSW-52040 - Manual (Page 465)

29-5
Default:
Disabled.
Command Mode:
Admin Mode.
Example:
Switch# debug ipv6 dhcp detail
29.6 debug ipv6 dhcp relay packet
Command:
debug ipv6 dhcp relay packet
no debug ipv6 dhcp relay packet
Function:
To enable the debugging information for protocol packets of DHCPv6 relay, the no form of this command will disable
the debugging.
Default:
Disabled.
Command Mode:
Admin Mode.
Example:
Switch# debug ipv6 dhcp relay packet
29.7 debug ipv6 dhcp server
Command:
debug ipv6 dhcp server { event | packet }
no debug ipv6 dhcp server { event | packet }
Function:
To enable the debugging information of DHCPv6 server, the no form of this command will disable the debugging.