PLANET WGSW-52040 - Manual (Page 76)

1-75
1.2.14 terminal length
Command:
terminal length <0-512>
terminal no length
Function:
Set length of characters displayed in each screen on terminal; the “terminal no length” cancels the screen switching
operation and display content once in all.
Parameter:
Length of characters displayed in each screen, ranging between 0-512 (0 refers to non-stop display).
Command mode:
Admin Mode.
Default:
Default Length is 25.
Usage guide:
Set length of characters displayed in each screen on terminal, so that the-More-message will be shown when
displayed information exceeds the screen. Press any key to show information in next screen. Default length is 25.
Example:
Configure length of characters in each display to 20.
Switch#terminal length 20
1.2.15 terminal monitor
Command:
terminal monitor
terminal no monitor
Function:
Copy debugging messages to current display terminal; the “terminal no monitor” command restores to the default
value.