PLANET WGSW-52040 - Manual (Page 487)

30-27
Parameters:
None.
Default Settings:
The system disables the option82 function by default.
Command Mode:
Global configuration mode
Usage Guide:
Only the DHCP Relay Agents configuring with this command can add option82 to the DHCP request message, and
let the server to process it. Before enabling this function, users should make sure that the DHCP service is enabled
and the Relay Agent will transmit the udp broadcast messages whose destination port is 67.
Example:
Enable the option82 function of the Relay Agent.
Switch(config)#service dhcp
Switch(config)# ip forward-protocol udp bootps
Switch(config)# ip dhcp relay information option
30.3 ip dhcp relay information option delimiter
Command:
ip dhcp relay information option delimiter [colon | dot | slash | space]
no ip dhcp relay information option delimiter
Function:
Set the delimiter of each parameter for suboption of option82 in global mode, no command restores the delimiter as
slash.
Parameters:
None.
Default Settings:
slash (“/”).
Command Mode:
Global mode