PLANET WGSW-52040 - Manual (Page 414)

23-25
Function:
Clear the statistic information of ARP messages of the switch. For box switches, this command will only clear
statistics of APP messages received and sent from the current boardcard.
Command mode:
Admin Mode
Example:
Switch#clear arp traffic
23.3.4 debug arp
Command: debug arp {receive|send|state}
no debug arp {receive|send|state}
Function:
Enables the ARP debugging function; the “no debug arp {receive|send|state}” command disables this debugging
function.
Parameter:
receive the debugging-switch of receiving ARP packets of the switch; send the debugging-switch of sending ARP
packets of the switch; state the debugging-switch of APR state changing of the switch.
Default:
ARP debug is disabled by default.
Command mode:
Admin Mode.
Usage Guide:
Display contents for ARP packets received/sent, including type, source and destination address, etc.
Example:
Enable ARP debugging.
Switch#debug arp receive
%Jan 01 01:05:53 2006 IP ARP: rcvd, type REQUEST, src 172.16.1.251, 00-e0-4c-88-ad-bc, dst 172.16.1.110,
00-00-00-00-00-00 flag 0x0, pkt type 1, intf Vlan100.
%Jan 01 01:05:53 2006 IP ARP: rcvd, type REQUEST, src 172.16.1.251, 00-e0-4c-88-ad-bc, dst 172.16.1.110,