PLANET WGSW-52040 - Manual (Page 597)

37-137
Command Mode:
VLAN configuration mode
Default:
None.
Usage Guide:
1. ‘associated VLAN’ and ‘associated port’ of the multicast VLAN are absolute, they do not affect each other when
happening the cross.
2. The port of the aggregation member cannot be associated, but the associated port is able to be added to
port-group and cancelling the association.
3. The configured port type includes port-channel port or ethernet port and the port is only configured as ACCESS
mode.
4. The port (it will be associated) cannot belong to the multicast VLAN, in the same way, the associated port cannot
be divided in multicast VLAN.
5. When the associated port mode is set as non ACCESS mode, the mode cannot be changed.
Example:
Suppose vlan2 is multicast VLAN.
Switch(config-vlan2)#multicast-vlan association interface ethernet 1/2
Switch(config-vlan2)#multicast-vlan association interface port-channel 2
Switch(config-vlan2)#no multicast-vlan association interface ethernet 1/2
Switch(config-vlan2)#no multicast-vlan association interface port-channel 2