PLANET WGSW-52040 - Manual (Page 322)

18-91
18.3.6 show mac-notification summary
Command:
show mac-notification summary
Function:
Show the configuration of MAC notification and the data of the notification packet.
Parameter:
None.
Default:
Do not show the summary.
Command Mode:
Admin mode
Usage Guide:
With this command, check the configuration of MAC address and the sending status of MAC notification trap.
Example:
Switch#show mac-notification summary
MAC address notification:enabled
MAC address snmp traps:enabled
MAC address notification interval = 10
MAC address notification history log size = 120
MAC address added = 0
MAC address removed = 0
MAC address snmp traps generated = 0
18.3.7 snmp-server enable traps mac-notification
Command:
snmp-server enable traps mac-notification
no snmp-server enable traps mac-notification
Function: