PLANET WGSW-52040 - Manual (Page 270)

17-39
Function:
Show the value of each timer. Note that the value is not the remaining time to run the timer but the initial value when
enabling the timer.
Parameters:
join, join timer
leave, leave timer
leaveAll, leaveAll timer
Command Mode:
Admin mode
Default:
200|600|10000 milliseconds for join | leave | leaveAll timer respectively.
Usage Guide:
Show the corresponding value of the timer specified in the command.
Example:
Show the value of all garp timers currently.
Switch#show garp timer join
Garp join timer’s value is 200(ms)
17.1.18 show gvrp fsm information
Command:
show gvrp fsm information interface (ethernet | port-channel) IFNAME
Function:
Show the current state of all registered machines and request state machines on specified or all ports.
Parameters:
ethernet, physical port
port-channel, aggregate port
IFNAME, port name
Command Mode: