PLANET WGSW-52040 - Manual (Page 195)

9-194
dst-ip performs load-balance according to the destination IP
dst-src-ip performs load-balance according to the destination and source IP
Command mode:
Aggregation port mode.
Default:
Perform load-balance according to the source and destination MAC.
Usage Guide:
Use port-channel to implement load-balance, user can configure the load-balance mode according to the
requirements. If the specific load-balance mode of the command line is different with the current load-balance mode
of port-group, then modify the load-balance of port-group as the specific load-balance of command line; otherwise
return a message to notice that the current mode is already configured.
Example:
Set load-balance mode of port-group.
Switch(config)#interface port-channel 1
Switch(Config-If-Port-Channel1)#load-balance src-mac
9.7 port-group
Command:
port-group <port-group-number>
no port-group <port-group-number>
Function:
Creates a port group. The no command deletes that group.
Parameters:
> is the group number of a port channel from 1～14.
Default:
There is no port-group.
Command mode:
Global Mode