PLANET WGSW-52040 - Manual (Page 415)

23-26
00-00-00-00-00-00 flag 0x0, pkt type 1, intf Vlan100.
e%Jan 01 01:05:53 2006 IP ARP: rcvd, type REQUEST, src 172.16.1.251, 00-e0-4c-88-ad-bc, dst 172.16.1.110,
00-00-00-00-00-00 flag 0x0, pkt type 1, intf Vlan100.
%Jan 01 01:05:53 2006 IP ARP: rcvd, type REQUEST, src 172.16.1.251, 00-e0-4c-88-ad-bc, dst172.16.1.110,
00-00-00-00-00-00 flag 0x0, pkt type 1, intf Vlan100.
23.3.5 show arp
Command:
show arp [<ipaddress>] [<vlan-id>] [<hw-addr>] [type {static | dynamic}] [count] [vrf word]
Function:
Displays the ARP table.
Parameters:
is a specified IP address; <vlan-id> stands for the entry for the identifier of specified VLAN;
<hw-addr> for entry of specified MAC address; static for static ARP entry; dynamic for dynamic ARP entry; count
displays number of ARP entries; word is the specified vrf name.
Command mode:
Admin Mode
Usage Guide:
Displays the content of current ARP table such as IP address, MAC address, hardware type, interface name, etc.
Example:
Switch#show arp
ARP Unicast Items: 7, Valid: 7, Matched: 7, Verifying: 0, Incomplete: 0, Failed: 0, None: 0
Address Hardware Addr Interface Port Flag
50.1.1.6 00-0a-eb-51-51-38 Vlan50 Ethernet1/11 Dynamic
50.1.1.9 00-00-00-00-00-09 Vlan50 Ethernet1/1 Static
150.1.1.2 00-00-58-fc-48-9f Vlan150 Ethernet1/4 Dynamic
Displayed information Explanation
Total arp items Total number of ARP entries.
Valid ARP entry number matching the filter conditions and
attributing the legality states.