PLANET WGSW-52040 - Manual (Page 82)

1-81
Command Mode:
Global Mode
Usage Guide:
None.
Example:
Set the max connection number supported by the SSH service as 10.
Switch(config)#ssh-server max-connection 10
1.2.23 ssh-server timeout
Command:
ssh-server timeout
no ssh-server timeout
Function:
Configure timeout value for SSH authentication; the “no ssh-server timeout” command restores the default timeout
value for SSH authentication.
Parameter:
is timeout value; valid range is 10 to 600 seconds.
Command mode:
Global Mode
Default:
SSH authentication timeout is 180 seconds by default.
Usage Guide:
This command is used to set SSH authentication timeout, the default timeout is 180 seconds.
Example:
Set SSH authentication timeout to 240 seconds.
Switch(config)#ssh-server timeout 240