PLANET WGSW-52040 - Manual (Page 469)

29-9
Default:
No global address is configured for interfaces by default.
Usage Guide:
The IPv6 address of an interface falls into two parts: <prefix-name> and <ipv6-prefix>/>. If routing
advertisement has been enabled, the first 64 bits of the addresses will be advertised. The address generated by
<prefix-name> and <ipv6-prefix/prefix-length> combination will be removed, and the advertising of the prefix will
be disabled. Only one <ipv6-prefix/prefix-length> can be configured for one prefix name.
Example:
If the prefix name my-prefix designates 2001:da8:221::/48, then the following command will add the address
2001:da8:221:2008::2008 to interface VLAN1.
Switch(Config-if-Vlan1)# ipv6 address my-prefix 0:0:0:2008::2008/64
29.12 ipv6 dhcp client pd
Command:
ipv6 dhcp client pd [rapid-commit]
no ipv6 dhcp client pd
Function:
To configure DHCPv6 prefix delegation client for the specified interface. The no form of this command will disable the
DHCPv6 prefix delegation client and remove the allocated address prefix.
Parameters:
<prefix-name> is the string with its length no more than 32, which designates the name of the address prefix. If
rapid-commit optional is specified and the prefix delegation server enables the rapid-commit function, then the
prefix delegation server will reply the prefix delegation client with the REPLY message directly. And the prefix
delegation request will be accomplished by exchanging messages once.
Command Mode:
Interface Configuration Mode.
Default:
DHCPv6 prefix delegation client is not enabled by default.
Usage Guide: