PLANET WGSW-52040 - Manual (Page 827)

60-367
Examples:
Configure the max number of broadcast servers is 70 on the switch.
Switch(config)#ntp broadcast server count 70
60.11 ntp disable
Command:
ntp disable
no ntp disable
Function:
To disable/enable the NTP function on port.
Parameter:
None.
Default:
To enable NTP function on all ports.
Command Mode:
vlan Configuration Mode.
Usage Guide:
None.
Example:
To disable the NTP function on vlan1 interface.
Switch(config)# interface vlan 1
Switch(Config-if-Vlan1)#ntp disable
60.12 ntp enable
Command:
ntp enable
ntp disable