PLANET WGSW-52040 - Manual (Page 264)

17-33
Command Mode:
Global mode
Default:
10000 ms.
Usage Guide:
Check whether the value satisfy the range. If so, modify the value of garp leaveAll timer to the specified value,
otherwise return a configuration error.
Example:
Set the value of garp leaveAll as 20000ms.
Switch(config)#garp timer leaveall 20000
17.1.10 gvrp (Global)
Command:
gvrp
no gvrp
Function:
Enable/disable GVRP funciton globally.
Parameters:
None.
Command Mode:
Global mode
Default:
Disabled.
Usage Guide:
Enable GVRP function globally and only in this way GVRP module can work normally.
Example:
Enable GVRP function globally.
Switch(config)#gvrp