PLANET WGSW-52040 - Manual (Page 848)

63-388
Switch#clear logging sdram
Related Command: show logging buffered
63.3 history all-users max-length
Command:
history all-users max-length
Function:
Set the max command history of all users saved by the switch.
Parameter:
: the command history number can be saved, ranging from 100 to 1000
Command Mode:
Global mode
Usage Guide:
The system can save 100 recent command history of all users at best by default, using this command can set the
max command history number.
Example:
Switch(config)#history all-users max-length 500
63.4 logging
Command:
logging { | <ipv6-addr> } [facility <local-number>] [level <severity>]
no logging { | <ipv6-addr> } [facility <local-number>]
Function:
The command is used to configure the output channel of the log host. The “no” form of this command will disable the
output at the log host output channel.
Parameter:
<ipv4-addr> is the IPv4 address of the host, is the IPv6 address of the host; <local-number> is the