PLANET WGSW-52040 - Manual (Page 729)

49-269
Enable the event debugging of web portal authentication.
switch#debug webportal event
0 event event debug is on
49.5 debug webportal packet
Command:
debug webportal packet {all | receive | send} {interface |}
no debug webportal packet {all | receive | send} {interface |}
Function:
Enable/ disable the debugging that show the synchronization information of the local clock.
Parameter:
send: Enable the debugging that web portal sends the packet.
receive: Enable the debugging that web portal receives the packet.
all: Enable the debugging that web portal receives and sends the packet.
: The port name.
The port name is null that means to enable all ports.
Command Mode:
Admin Mode.
Default:
There is no limitation.
Usage Guide:
Enable the packet debugging of web portal authentication, the no command disables the packet debugging.
Example:
Enable the packet debugging of web portal authentication.
switch#debug webportal packet ?
all Send and receive packet information
receive Receive package information
send Send package information
switch#debug webportal packet all interface ethernet 1/1
Ethernet1/1 0 packet rx debug is on