PLANET WGSW-52040 - Manual (Page 830)

60-370
60.15 ntp server
Command:
ntp server {<ip-address> | } [version >] [key <key-id>]
no ntp server {<ip-address>|}
Function:
To enable specified time server of time source, the no form of this command cancels the specified time server of time
source.
Parameter:
ip-address: IPv4 address of time server.
ipv6-address: IPv6 address of time server.
version: The version information configured for server.
version_no: The version number of server, range is from 1 to 4, default is 4.
key: To configure key for server.
key-id: The key id.
Default:
Disabled.
Command Mode:
Global Mode.
Usage Guide:
None.
Example:
To configure time server address as 1.1.1.1 on switch.
Switch(config)#ntp server 1.1.1.1
60.16 ntp trusted-key
Command:
ntp trusted-key <key-id>
no ntp trusted-key <key-id>