PLANET WGSW-52040 - Manual (Page 835)

61-375
61.2 clock summer-time recurring
Command:
clock summer-time <word> recurring <HH:MM> <MM.DD> <HH:MM> <MM.DD> [<offset>]
no clock summer-time
Function:
Configure the recurrent summer time range, the time in this range is summer time.
Parameter:
is the time zone name of summer time; <HH:MM> is the start time, the format is hour (from 0 to 23):minute
(from 0 to 59); <MM.DD> is the start date, the format is month(from 1 to 12).date(from 1 to 31); <HH:MM> is the end
time, the format is hour(from 0 to 23):minute(from 0 to 59); <MM.DD> is the end date, the format is month(from 1 to
12).date(from 1 to 31); <offset> is the time offset, the range from 1 to 1440, unit is minute, default value is 60
minutes.
Default:
There is no summer time range.
Command Mode:
Global Mode
Usage Guide:
This command sets the start and the end time for the recurrent summer time. When the system time reaches to the
start time point of summer time, the clock is changed and increase value, the system enters summer time.
When the system time reaches to the end time point of summer time, the clock is changed again, subtract
value from system time, the system finishes summer time. There is no relation between the recurrent summer time to
the year, the system clock will be changed when it reaches to the start and the end time point of summer time year
after year. This command supports the summer time of southern hemisphere.
Example:
Configure the time range of summer time at 12:10 from april 6th to augest 6th year after year, offset value as 70
minutes, summer time is named as aaa.
Switch(config)# clock summer-time aaa recurring 12:10 4.6 12:10 8.6 70