PLANET WGSW-52040 - Manual (Page 42)

1-41
name. No space is allowed in each part or between two parts.
2. The suffix of all file names should be .cfg.
3. The length of the full file path should not be longer than 128 characters, while the file name cannot be longer than
80 characters.
Command Mode:
Admin Mode.
Default Settings:
None.
Usage Guide:
Configure the CFG file used in the next booting can only use .cfg files stored in the switch.
Example:
Set flash:/ startup.cfg as the CFG file used in the next booting of the switch.
Switch# boot startup-config flash:/ startup.cfg
1.1.5 clock set
Command:
clock set <HH:MM:SS>
Function:
Set system date and time.
Parameter:
is the current time, and the valid scope for HH is 0 to 23, MM and SS 0 to 59; is the
current year, month and date, and the valid scope for YYYY is 1970~2038, MON meaning month, and DD between 1
to 31.
Command mode:
Admin Mode.
Default:
upon first time start-up, it is defaulted to 2006.1.1 0: 0: 0.