PLANET WGSW-52040 - Manual (Page 257)

17-26
Chapter 17 VLAN Configuration
17.1 Commands for VLAN Configuration
17.1.1 debug gvrp event
Command:
debug gvrp event interface (ethernet | port-channel |) IFNAME
no debug gvrp event interface (ethernet | port-channel |) IFNAME
Function:
Enable/disable GVRP event debugging including the transfer of state machine and the expiration of timer.
Parameters:
ethernet, physical port
port-channel, aggregate port
IFNAME, port name
Command Mode:
Admin mode
Default:
GVRP event debugging is disabled.
Usage Guide:
Use this command to enable GVRP event debugging.
Example:
Show GVRP event debugging.
Switch(config)#debug gvrp event interface ethernet 1/1
%Jan 16 02:25:14 2006 GVRP EVENT: LO -> VO ，interface ethernet 1/1, vlan 100
%Jan 16 02:35:15 2006 GVRP EVENT: join timer expire，interface ethernet 1/1
17.1.2 debug gvrp packet
Command: