PLANET WGSW-52040 - Manual (Page 123)

3-122
the cluster as a member switch automatically; the “no cluster auto-add” command disables this function.
Command mode:
Global Mode
Default:
This function is disabled by default. That means that the candidate switches are not automatically added to the
cluster.
Usage Guide:
After enabling this command on a commander switch, candidate switches will be automatically added as members.
Example:
Enable the auto adding function in the commander switch.
Switch(config)#cluster auto-add
3.3 cluster commander
Command:
cluster commander []
no cluster commander
Function:
Set the switch as a commander switch, and create a cluster.
Parameter:
is the cluster’s name, no longer than 32 characters.
Command mode:
Global Mode
Default:
Default setting is no commander switch. cluster_name is null by default.
Usage Guide:
This command sets the role of a switch as commander switch and creates a cluster, which can only be executed on
non commander switches. The cluster_name cannot be changed after the switch becoming a commander, and “no