PLANET WGSW-52040 - Manual (Page 573)

35-113
35.2.15 ip igmp snooping vlan mrpt
Command:
ip igmp snooping vlan <vlan-id> mrpt <value>
no ip igmp snooping vlan <vlan-id> mrpt
Function:
Configure this survive time of mrouter port.
Parameter:
vlan-id: VLAN ID, ranging between <1-4094>
value: mrouter port survive period, ranging between <1-65535>seconds
Command Mode:
Global mode
Default:
255s
Usage Guide:
This command validates on dynamic mrouter ports but not on mrouter port. To use this command, IGMP Snooping of
this VLAN should be enabled previously.
Example:
Switch(config)#ip igmp snooping vlan 2 mrpt 100
35.2.16 ip igmp snooping vlan query-interval
Command:
ip igmp snooping vlan <vlan-id> query-interval <value>
no ip igmp snooping vlan <vlan-id> query-interval
Function:
Configure this query interval.