PLANET WGSW-52040 - Manual (Page 666)

41-206
41.5 no am all
Command:
no am all [ip-pool | mac-ip-pool]
Function:
Delete MAC-IP address pool or IP address pool or both pools configured by all users.
Parameters:
ip-pool is the IP address pool; mac-ip-pool is the MAC-IP address pool; no parameter means both address pools.
Default:
Both address pools are empty at the beginning.
Command Mode:
Global Mode
Usage Guide:
None.
Example:
Delete all configured IP address pools.
Switch(config)#no am all ip-pool
41.6 show am
Command:
show am [interface ]
Function:
Display the configured AM entries.
Parameters:
is the name of the interface of which the configuration information will be displayed. No
parameter means to display the AM configuration information of all interfaces.
Command Mode: