PLANET WGSW-52040 - Manual (Page 404)

23-15
There is not static neighbor table entry.
Usage Guide:
IPv6 address and multicast address for specific purpose and local address cannot be set as neighbor.
Example:
Set static neighbor 2001:1:2::4 on port E1/1, and the hardware MAC address is 00-30-4f-89-44-bc.
Switch(Config-if-Vlan1)#ipv6 neighbor 2001:1:2::4 00-30-4f-89-44-bc interface Ethernet 1/1
23.2.16 show ip interface
Command:
show ip interface [<ifname> | vlan ] brief
Function:
Show the brief information of the configured layer 3 interface.
Parameters:
Interface name; VLAN ID.
Default:
Show all brief information of the configured layer 3 interface when no parameter is specified.
Command mode:
All modes.
Usage Guide:
None.
Example:
Restarter#show ip interface vlan1 brief
Index Interface IP-Address Protocol
3001 Vlan1 192.168.2.11 up