PLANET WGSW-52040 - Manual (Page 715)

48-255
Parameter:
None.
Command Mode:
Port mode
Default:
Disable PPPoE intermediate agent function of the port.
Usage Guide:
After enable PPPoE IA function of the port, add vendor tag for PPPoE packet of the port.
Note: 1. It must enable global pppoe intermediate-agent function.
2. At least one port is connected to PPPoE server, and the port mode is trust.
Example:
Enable PPPoE intermediate agent function of the port ethernet 1/2.
Switch(config-if-ethernet1/2)#pppoe intermediate agent
48.4 pppoe intermediate-agent circuit-id
Command:
pppoe intermediate-agent circuit-id
no pppoe intermediate-agent circuit-id
Function:
Configure circuit ID of the port, the no command cancels this configuration.
Parameter:
: circuit-id, the max character number is 63 bytes.
Command Mode:
Port mode
Default:
This configuration is null.
Usage Guide: