PLANET WGSW-52040 - Manual (Page 68)

1-67
line selects the accounting line, including console, vty (telnet and ssh); command <1-15> is the level of the
accounting command; start-stop sends the accounting start or the accounting stop when the user is logging or exit
the login; stop-only sends the accounting stop when the user exits the login only; none does not send the
accounting start or the accounting stop; method is the list of the accounting method, it only supports tacacs keyword;
tacacs uses the remote TACACS+ server to count.
Default:
There is no accounting method.
Command Mode:
Global Mode.
Usage Guide:
console and vty login method are able to set the corresponding command accounting method respectively, the
accounting method only supports TACACS+ method currently. Only the stop information of the accounting is
recorded, whether command accounting configures start-stop method or stop-only method.
Example:
Configure the command accounting with the telnet method.
Switch(config)#authorization line vty command 15 start-stop tacacs
1.2.4 authentication enable
Command:
authentication enable method1 [method2…]
no authentication enable
Function:
Configure the list of the enable authentication method. The no command restores the default authentication method.
Parameters:
method is the list of the authentication method, it must be among local, tacacs and radius keywords; local uses the
local database to authenticate; tacacs uses the remote TACACS+ authentication server to authenticate; radius uses
the remote RADIUS authentication server to authenticate.
Default:
The local authentication is enable command by default.