PLANET WGSW-52040 - Manual (Page 481)

29-21
29.26 show ipv6 dhcp conflict
Command:
show ipv6 dhcp conflict
Function:
Show the log for the address that have a conflict record.
Command mode:
Admin and Configuration Mode.
Example:
Switch# show ipv6 dhcp conflict
29.27 show ipv6 dhcp interface
Command:
show ipv6 dhcp interface [<interface-name>]
Function:
To show the information for DHCPv6 interface.
Parameter:
is the name and number of interface, if the parameter is not provided, then all
the DHCPv6 interface information will be shown.
Command Mode:
Admin and Configuration Mode.
Usage Guide:
To show the information for DHCPv6 interface, include Port Mode (Prefix delegation client、DHCPv6 server、
DHCPv6 relay) , and the relative conformation information under all kinds of mode.
Example:
Switch#show ipv6 dhcp interface vlan10
Vlan10 is in server mode
Using pool: poolv6
Preference value: 20