PLANET WGSW-52040 - Manual (Page 235)

13-4
RX loss of signal
RX power low
Detail diagnostic and threshold information:
Diagnostic Threshold
Realtime Value High Alarm Low Alarm High Warn Low Warn
----------------- ----------- ----------- ------------ ---------
Temperature（℃） 33 70 0 70 0
Voltage（V） 7.31 10.00 0.00 5.00 0.00
Bias current（mA） 3.11 10.30 0.00 5.00 0.00
RX Power（dBM） -30.54(A-) 9.00 -25.00（-34） 9.00 -25.00
TX Power（dBM） -1.01 9.00 -12.05 9.00 -10.00
Ethernet 1/22 transceiver threshold-violation information:
Transceiver monitor is disabled. Monitor interval is set to 30 minutes.
The last threshold-violation doesn’t exist.
13.5 transceiver-monitoring
Command:
transceiver-monitoring {enable | disable}
Function:
Enable/ disable the transceiver monitoring.
Parameter:
enable/ disable: Enable or disable the function.
Command Mode:
Port mode
Default:
Disable.
Usage Guide:
None.
Example:
Enable the transceiver monitoring of ethernet1/1.