PLANET WGSW-52040 - Manual (Page 756)

51-296
Command Mode:
Admin Mode.
Default:
None.
Usage Guide:
After enable event debug, the relative event information of dhcp type will be print for misarranging. The no command
disables this function.
Example:
Enable binding event debug of dhcp type.
Switch#debug ipv6 dhcp snooping event
51.2.3 debug ipv6 dhcp snooping packet
Command:
debug ipv6 dhcp snooping packet
no debug ipv6 dhcp snooping packet
Function:
Enable the debug of DHCPv6 packets, no command disables the debug.
Parameter:
None.
Command Mode:
Admin Mode.
Default:
None.
Usage Guide:
After enable packets debug, the relative DHCPv6 packtets will be print for misarranging. The no command disables
this function.