PLANET WGSW-52040 - Manual (Page 812)

57-352
57.2 monitor session remote vlan
Command:
monitor session <session> remote vlan <vid>
no monitor session <session> remote vlan
Function:
To configure local mirror session to RSPAN. The no form of this command will restore the RSPAN to local mirror.
Parameter:
<session>: session ID, range between 1~4. <vid>: The id of RSPAN VLAN.
Command Mode:
Global Mode.
Default:
Not configured.
Usage Guide:
To configure local mirror session to RSPAN. The VLAN id is the RSPAN VLAN. The mirrored data grams will be
attached with RSPAN tags.
Example:
Switch(config)#monitor session 1 remote vlan 5
57.3 monitor session reflector-port
Command:
monitor session <session> reflector-port
no monitor session <session> reflector-port >
Function:
To configure reflector port, the no form of this command will delete the reflector port.
Parameter:
<session>: Session ID, range between 1~4, <interface-number>: Interface number.
Command Mode: