PLANET WGSW-52040 User Manual
Page 136
3-135
Command Mode:
Admin and Configuration Mode.
Usage Guide:
Executing this command on the commander switch will display the topology information with its starting node
specified.
Example:
Execute this command on the commander switch to display the topology information under different conditions.
Switch#show cluster topology
Role: commander(CM);Member(M);Candidate(CA);Other commander(OC);Other member(OM)
LV SN Description Hostname Role MAC_ADDRESS Upstream Upstream leaf
local-port remote-port node
== ============ ============ == ================= ============ ============ =
x xxx xxxxxxxxxx12 xxxxxxxxxx12 xx xx-xx-xx-xx-xx-xx xxxxxxxxxx12 xxxxxxxxxx12 x
1 1 WGSW-52040 LAB_SWITCH_1 CM 01-02-03-04-05-01 -root- -root- -
2 WGSW-52040 LAB_SWITCH_2 M 01-02-03-04-05-02 eth
1/1
eth
1/2
N
3 WGSW-52040 LAB_SWITCH_3 CA 01-02-03-04-05-03 eth
1/1
eth
1/3
Y
4 WGSW-52040 LAB_SWITCH_4 CA 01-02-03-04-05-04 eth
1/1
eth
1/4
Y
................................................................................
2 2 WGSW-52040 LAB_SWITCH_2 M 01-02-03-04-05-02 eth 1/1 eth 1/2 -
5 WGSW-52040 LAB_SWITCH_1 OC 01-02-03-04-05-13 eth 1/1 eth 1/2 Y
6 WGSW-52040 LAB_SWITCH_1 OM 01-02-03-04-05-14 eth 1/1 eth 1/3 Y
----------------------------------------------------------
Switch#show cluster topology root-sn 2
Role: commander(CM);Member(M);Candidate(CA);Other commander(OC);Other member(OM)
SN Description Hostname Role MAC_ADDRESS Upstream Upstream leaf
local-port remote-port node
== ============ ============ == ================= ============ ============ =
* 2 WGSW-52040 LAB_SWITCH_2 M 01-02-03-04-05-02 eth 1/1 eth 1/2 -
5 WGSW-52040 LAB_SWITCH_1 OC 01-02-03-04-05-13 eth 1/1 eth 1/2 Y
6 WGSW-52040 LAB_SWITCH_1 OM 01-02-03-04-05-14 eth 1/1 eth 1/3 Y
----------------------------------------------
Switch#show cluster topology nodes-sn 2
Toplogy role: Member