PLANET WGSW-52040 - Manual (Page 634)

39-174
39.10 dot1x macfilter enable
Command:
dot1x macfilter enable
no dot1x macfilter enable
Function:
Enables the dot1x address filter function in the switch; the "no dot1x macfilter enable" command disables the dot1x
address filter function.
Command mode:
Global Mode
Default:
dot1x address filter is disabled by default.
Usage Guide:
When dot1x address filter function is enabled, the switch will filter the authentication user by the MAC address. Only
the authentication request initialed by the users in the dot1x address filter table will be accepted.
Example:
Enabling dot1x address filter function for the switch.
Switch(config)#dot1x macfilter enable
39.11 dot1x macbased port-down-flush
Command:
dot1x macbased port-down-flush
no dot1x macbased port-down-flush
Function:
Enables this command, when the dot1x certification according to mac is down, delete the user who passed the
certification of the port; The no command does not make the down operation.
Command mode:
Global Mode
Default:
The command is not enabled by default
.