PLANET WGSW-52040 - Manual (Page 426)

24-37
Function:
Enable the debug switch of ARP scanning prevention; ”no debug anti-arpscan [port | ip]” command disables the
switch.
Parameters:
None.
Default Settings:
Disable the debug switch of ARP scanning prevention
Command Mode:
Admin Mode
User Guide:
After enabling debug switch of ARP scanning prevention users can check corresponding debug information or
enable the port-based or IP-based debug switch separately whenever a port is closed by ARP scanning prevention
or recovered automatically, and whenever IP t is closed or recovered .
Example:
Enable the debug function for ARP scanning prevention of the switch.
Switch(config)#debug anti-arpscan