PLANET WGSW-52040 - Manual (Page 629)

39-169
ratsm: Enable the debug information of Re-Authentication Timer state machine;
: the name of the interface.
Usage Guide:
By enabling the debug information of dot1x, users can check the negotiation process of dot1x protocol, which might
help diagnose the cause of faults if there is any.
Example:
Enable the debug information of dot1x state machine.
Switch#debug dot1x fsm asm interface ethernet1/1
39.4 debug dot1x packet
Command:
debug dot1x packet {all | receive | send} interface <interface-name>
no debug dot1x packet {all | receive | send} interface
Function:
Enable the debug information of dot1x about messages; the no operation of this command will disable that debug
information.
Command Mode:
Admin Mode.
Parameters:
send: Enable the debug information of dot1x about sending packets;
receive: Enable the debug information of dot1x about receiving packets;
all: Enable the debug information of dot1x about both sending and receiving packets;
<interface-name>: The name of the interface.
Usage Guide:
By enabling the debug information of dot1x about messages, users can check the negotiation process of dot1x
protocol, which might help diagnose the cause of faults if there is any.
Example:
Enable the debug information of dot1x about messages.
Switch#debug dot1x packet all interface ethernet1/1