PLANET WGSW-52040 - Manual (Page 769)

52-309
Command mode:
Global mode.
Usage Guide:
Configure the query time to adjust the query interval of MRPP, the default interval is 100ms.
Example:
Set the query time as 200ms.
Switch(Config)# mrpp poll-time 200
52.12 mrpp ring
Command:
mrpp ring <ring-id>
no mrpp ring >
Function:
Create MRPP ring, and access MRPP ring mode, the “no mrpp ring<ring-id>” command deletes configured MRPP
ring.
Parameter:
is MRPP ring ID, the valid range is from 1 to 4096.
Command Mode:
Global Mode
Usage Guide:
If this MRPP ring doesn’t exist it create new MRPP ring when executing the command, and then it enter MRPP ring
mode. It needs to ensure disable this MRPP ring when executing the “no mrpp ring” command.
Example:
Switch(config)#mrpp ring 100