PLANET WGSW-52040 - Manual (Page 824)

60-364
None.
Default:
Disabled.
Command Mode:
Admin Mode.
Usage Guide:
None.
Example:
To enable debug switch of displaying local time synchronization information.
Switch# debug ntp sync
60.7 ntp access-group
Command:
ntp access-group server <acl>
no ntp access-group server <acl>
Function:
To configure/cancel the access control list of NTP Server.
Parameter:
<acl>: ACL number, range is from 1 to 99.
Default:
Not configure the access control of NTP Server.
Command Mode:
Global Mode.
Usage Guide:
None.
Example: