PLANET WGSW-52040 - Manual (Page 865)

63-405
Command mode:
Admin and configuration mode.
Example:
Switch#show tcp ipv6
LocalAddress LocalPort RemoteAddress RemotePort State IF VRF
:: 80 :: 0 LISTEN 0 0
:: 23 :: 0 LISTEN 0 0
Displayed Information Explanation
LocalAddress Local IPv6 address of TCP connection
LocalPort Local port of TCP connection
RemoteAddress Remote IPv6 address of TCP connection
RemotePort Remote Port of TCP connection
State The current state of TCP connection
IF Local port index of TCP connection
VRF Virtual route forward instance
63.24 show telnet login
Command:
show telnet login
Function:
List information of currently available telnet clients which are connected to the switch.
Command Mode:
Admin Mode and Configuration Mode.
Usage Guide:
This command used to list the information of currently available telnet clients which are connected to the switch.
Example:
Switch#show telnet login
Authenticate login by local.
Login user:
aa